Next Day Reprap

Simple

Everything You Need

Full printed build documentation and absolutely everything you need to get your Prusa Mendel 3D Printer up and running FAST!

Simple

Pre Assembled

No soldering required, all electronics fully assembled, fully assembled hot end, all wiring and connectors complete.

Simple

Customisable

It's a "Reprap!", supports additional extruders, Bluetooth, SD Cards, Fans and more....

Ready to Start 3D Printing?

The fastest, easiest, and best value Prusa Mendel !

Buy Now!
  1. Hot End Maintenance – Looking after your hot end

    Hot End Maintenance We thought we’d share some best practice and guidance for working with your hot end. Here is some guidance for maintaing and looking after your hot end. There are very strong forces involved with the extruder, the stepper motor combined with the hobbed bolt can exert a...
  2. 3D Printing Reprap Prusa Mendel Bar Clamps – Timelapse HD

    3D Printing Reprap Prusa Mendel Bar Clamps – Timelapse HD Reprap Mendel 3D Printing with ABS 3mm Plastic. 3D Printing 4 Reprap Prusa Mendel Bar Clamps. The Printer in this video is one of our Prusa Mendel 3D Printer Everything you need to build a Reprap Prusa Mendel 3D Printer....
  3. Reprap Prusa Mendel 3D Printing X Carriage – Timelapse – HD

    Reprap Prusa Mendel 3D Printing X Carriage – Timelapse – HD 3D Printing Reprap Prusa Mendel X Carriage Timelapse HD The Printer in this video is one of our Prusa Mendel 3D Printer Everything you need to build a Reprap Prusa Mendel 3D Printer. Including LM8UU bearings, Machined Couplings, aluminum...
  4. Reprap Prusa Mendel 3D Printers in Action HD

    Reprap Prusa Mendel 3D Printers in Action HD 5x Prusa Mendel 3D Reprap Printers Printing more Reprap Prusa Mendel Parts. The 3D Printers in this are from our Prusa Mendel 3D Printer kits Everything you need to build a Reprap Prusa Mendel 3D Printer. Including LM8UU bearings, Machined Couplings, aluminum...

Next Day Reprap Prusa Mendel 3D Printer Kit

Reprap Mendel Kit List

Buy this Prusa Mendel 3D Printer Kit Today Before 12pm

With FREE Next Working Day Delivery

Options


The Reprap Prusa Mendel 3d Printer Kit contains everything you need to build a Reprap Prusa Mendel 3D Printer. Including LM8UU bearings, Machined Couplings, Aluminium T5 12 Tooth Pulleys, Laser Cut Aluminum Build Bed Base, RAMPS 1.4 Electronics, Machined Hot End and a Full Comprehensive Printed Build Manual. Expandable and upgradeable with support for extra extruder, SD Card & Bluetooth.

You don’t need internet access to build this 3D Printer, in fact with the exception of electricity and a computer, you could build and be printing with this kit if you had the box delivered to a desert island!


This is one of the fastest and easiest Reprap Prusa Mendel Kits to build for many reasons :
  • Full, printed Prusa Mendel Build Manual (no omissions, no inconsistencies)
  • All Software required supplied on CD
  • Fully assembled Electronics and Power Connections
  • No soldering required
  • Fully assembled Hot End , just connect power and mount
  • All connectors and wiring complete ( you just need to crimp the connectors on the stepper motors)

We have used professionally assembled RAMPS 1.4 Electronics, as these have the greatest scope for open source compatibility and upgradeability.
  • Supports 2nd Extruder Power & Temp
  • Supports SD Card Expansion
  • Supports Bluetooth Expansion
  • Mulitple GPIO/ SERVO Expansion abilities
  • Support for Fan control & connection
  • Thermal Overload protection
  • Wide range of Firmware support
  • Quiet, fast operation

The Reprpa Prusa Mendel Kit has high quality 3D ABS Plastic Pure White printed parts designed for LM8UU Bearings.
For the complete list of downloadable STL files please visit our Downloads page


We have tried to keep the parts as standard as possible with a couple of subtle improvements.Instead of bar clamps for supporting the lower Z axis we have used a custom Lower Z Motor Mount which takes a 608ZZ bearing for the Z axis to drop into. The Top Z Motor Mounts have been slightly modified to incorporate the original ROD clamp.

We use machined aluminium Pulleys and Couplings< to ensure reliable and consistent performance of your Reprap Prusa Mendel 3D printer kit.

Assembled Prusa Mendel Kit





For more images please visit the Prusa Mendel Image Gallery


Buy this Prusa Mendel 3D Printer Kit Today Before 12pm

With FREE Next Working Day Delivery

Options




Prusa Mendel Kit Features





Related Products


Prusa Mendel Parts Help and Support


Next Day Reprap Prusa Mendel 3D Printer Kit

Whats in the box?

Below is a complete list of all the components within our Prusa Mendel 3D Printer kit. It includes everything you need to build your printer and start printing, except for a computer and electricity!

For Images please see the detailed Prusa Mendel Kit Component list

0.0 Tools & Ancillaries
  • 0.1 Build Manual
  • 0.3 Reprap Software CD
  • 0.4 20mm x 33m Kapton Tape
  • 0.5 Cable Ties
  • 0.10 Pully Grub Screw Allen Key
  • 0.11 1/2 Kg White 3mm ABS Filament
  • 0.12 4x 100mm Silver Tape

1.0 Electronics
  • 1.1 Fully assembled RAMPS 1.4 Wired & Soldered with Hot end power & Thermistor attached.
  • 1.2 Ramps Power Cables
  • 1.3 3x Mechanical Endstops with Completed Wiring
  • 1.4 Alpine Silent PSU
  • 1.5 ATX Power Supply Adaptor (to switch PSU)
  • 1.6 Reprap V2 Heatbead with Surface Mount LEDs/Resistor & Soldered Power Cable (inc Thermistor)
  • 1.7 5 x Nema 17 1.8 degree Hi Torque Stepper Motors
  • 1.8 Fully assembled Hot End wired with Power & Thermistor with Mini Fit Molex connectors.
  • 1.9 Mains Power Lead (Kettle Type) & 1M USB 2.0 Cable
  • 1.10 5x 4 Way 2.54mm Connectors & Crimps (for Stepper Motors)


2.0 Rod
  • 2.1 6x 300mm A2 Stainless 1.25mm Pitch Threaded Rod
  • 2.2 2x 450mm BZP 1.25mm Pitch Threaded Rod
  • 2.3 1x 320mm BZP 1.25mm Pitch Threaded
  • 2.4 6x 380mm BZP 1.25mm Pitch Threaded Rod
  • 2.5 2x 330mm Bright Stainless Steel Round Rod
  • 2.6 4x 400mm Steel Round Rod
  • 2.7 1x 16mm Steel Round Rod ( Extruder Idler
  • 2.8 1x 50mm Threaded Rod (X Idler)


3.0 Nuts & Bolts
  • 3.1 6 x A2 Stainless Steel M2 15mm Hex Socket Bolts
  • 3.2 30x A2 Stainless Steel M3 10mm Hex Socket Bolts
  • 3.3 15x A2 Stainless Steel M3 20mm Hex Socket Bolts
  • 3.4 2x A2 Stainless Steel M3 40mm Hex Socket Bolts
  • 3.5 2x A2 Stainless Steel M4 50mm Hex Socket Bolts
  • 3.6 2x A2 Stainless Steel M4 45mm Hex Head Bolts
  • 3.7 4x A2 Stainless Steel M4 40mm Countersunk Hex Socket Bolts
  • 3.8 6x A2 Stainless Steel M8 30mm Fender/Penny Washers
  • 3.9 6x A2 Stainless Steel M2 Nuts
  • 3.10 28x A2 Stainless Steel M3 Nuts
  • 3.11 8x A2 Stainless Steel M4 Nuts
  • 3.12 86x A2 Stainless Steel M8 Nuts
  • 3.13 2x M3 Nylock Nuts
  • 3.14 1x M8 Nylock Nuts
  • 3.15 12x A2 Stainless Steel M2 Washers
  • 3.16 56x A2 Stainless Steel M3 Washers
  • 3.17 16x A2 Stainless Steel M4 Washers
  • 3.18 100x A2 Stainless Steel M8 Washers
  • 3.19 1x Machined Hobbed Bolt
  • 3.20 1x M3 10mm Grub Screw


4.0 Bearings & Pulleys & Couplings
  • 4.1 12x LM8UU Bearings (1 Spare)
  • 4.2 9 x 608ZZ Bearings (1 Spare)
  • 4.3 2x 12 tooth T5 XL Aluminium Pulleys
  • 4.4 2x Rigid 5mm to 8mm Z Axis Couplings


5.0 Springs
  • 5.1 4 x Heat Bed Springs
  • 5.2 2x Z Axis Springs
  • 5.3 2x Extruder Springs


6.0 Timing Belts


7.0 Build Plate


8.0 ABS Printed Parts
  • 8.1 4x Bar Clamps
  • 8.2 2 x Rod Clamps
  • 8.3 4 x Belt Clamps
  • 8.4 3 x Endstop Holder
  • 8.5 4 x LM8UU Bearing Pillows
  • 8.6 1 x Extruder
  • 8.6.1 1 x Extruder Idler
  • 8.6.2 1x Extruder Large Gear
  • 8.6.3 1x Extruder Small Gear
  • 8.7 2 x Frame Vertex
  • 8.8 4x Frame Vertex with Foot
  • 8.9 2x Lower Z Mount
  • 8.10 1 x X Motor Mount
  • 8.11 1 x X Idler
  • 8.12 1x Y Motor Mount
  • 8.13 2x Z Motor Mount
  • 8.14 1 x X Carriage
  • 8.15 1x Hot End Clamp
  • 8.16 1x Ramps Box

Remember this Reprap Prusa Mendel 3D Printer kit contains everything you need to start 3D Printing, with a full printed build manual. We have pre assembled all of the electronics and completed all soldering, enabling you to get on with building your Reprap Prusa Mendel 3D Printer as easily and quickly as possible.

Reprap Prusa Mendel Kits in stock with FREENext Day delivery, order before 12pm GMT and your order will be dispatched today by Royal Mail Special Delivery/Parcel Force 24 for next working day delivery.


Buy this Prusa Mendel 3D Printer Kit Today Before 12pm

With FREE Next Working Day Delivery

Options


Related Products


Prusa Mendel Parts Help and Support


Next Day Reprap Prusa Mendel 3D Printer Kit

Help & Support

I have a sales question

Have you consulted the FAQs and not found an answer?
Then feel free to contact us on our contact form or email our sales team.

We aim to respond within 2 hours during working hours.

I have a returns question

If it’s pior to purchasing the then feel free to contact us on the contact form or email us.

If you wish to return an item which you have purchased please or email our returns dept for a returns authorisation number.

For more information on returning an item please see our full returns policy here.


We aim to respond within 2 hours during working hours.

Note before a product can be accepted at our warehouse a returns authorisation number needs to be issued, please email our returns department who will issue the relevant returns authorisation.

I have a technical question about building or using the 3D Printer

Have you consulted the FAQs
Have you consulted the Full Prusa Mendel Build Manual
Have you consulted the Downloads Section
Have you consulted the 3D Printer Additional Resources Section?

If you haven’t found the answer to what your looking for :

Then feel free to contact us on our contact form or email our technical support team.

We aim to respond within 2 hours during working hours.



Buy this Prusa Mendel 3D Printer Kit Today Before 12pm

With FREE Next Working Day Delivery





Prusa Mendel Parts Help and Support